TECHNICAL DETAILS
WIDTH 1280 mm
LENGTH 660 mm
HEIGHT 1450 mm
CUTTING DISK DIAMETER 63 mm.
CUTTING LENGTH FROM 0 TO 15 mm.
MAX TUBE DIAMETER 30 mm.
MIN TUBE DIAMETER 10 mm.
POWER 1,2 kW.
FEEDING 380V.
WEIGHT 345 Kg.
AIR PRESSION 6 Atm.
LUBRICATION CAPACITY TANK 50 Lt.
N ’OF SAW TURNS 1400 g/1 ’
TECHNICAL DETAILS
HEIGHT 900 mm.
LENGTH 935 mm.
WIDTH 960 mm.
SIZE OF THE TABLE 340 X 190 mm
N° OF TURNS SAW 1400 ( on request variable )
MAXIMUM SAW DIAMET ER 70 mm.
DIAMETER OF THE INTERNAL HOLE OF BLADE 16 mm FEEDING 380 Volt.
POWER 0,75 kW WEIGHT 150 Kg.
WEIGHT WITH PACKING 230Kg .
SIZES OF THE PACKING 1070 X 1130 X h1200
TECHNICAL DETAILS
LENGTH 800 mm
WIDTH 700 mm
HEIGHT 1055 mm
WEIGHT 150 Kg.
INSTALLED POWER: MOTOR 0,75 Kw
PUMP MOTOR 0,08 Kw
PROGRESS MOTOR 0,33 HP TENSION: 220/380 V 50Hz
TECHNICAL DETAILS
HEIGHT 1200 mm.
LENGTH 1100 mm.
WIDTH 1100 mm.
N° OF TURNS SAW 1600 (on request variable) WITH INVERTER 0 - 1600 WITHOUT INVERTER 1600 FIXED
MAXIMUM SAW DIAMETER 80 mm
MINIMUM LENGTH TO BE CUT 0 mm.
MAXIMUM ROD DIAMETER 10 mm.
SAW HOLE DIAMETER 16 mm.
MAXIMUM LE NGTH TO BE CUT 40 mm.
PRECISION OF THE CUT 0,02 mm
N° PIECES/MINUTE 30-45 IT DEPENDS ON THE TIME OF ADVANCE OF THE AIR PRESSURE 4 Atm
FEEDING 380 - 220 Volt.
POWER 0,75 kW
WEIGHT 160 Kg.
WEIGHT WITH PACKING 260 Kg.
SIZES OF THE PACKING 1480 X 1170 X h1170
TECHNICAL DETAILS
HEIGHT 700 mm.
LENGTH 430 mm.
WIDTH 600 mm.
DIMENSION TABLE 195 X 215.
DIAMETER MAX. SAW 80 mm. DIAMETER MIN. SAW 50 mm.
INTERNAL DIE DIAMETER OF THE SEGA 10 mm.
SHAFT HOLDER
SAW SPEED 1400 TURNS/min.
POWER 0,75 kW. FEEDING 380 Volt. 50 – 60 Hz.
WEIGHT 45 Kg. WEIGHT WITH PACKING 70 Kg.
DIMENSION PACKING 900 x 600 x h800
Page 1 of 2
Via Samuel Morse, 20
52100 AREZZO - ITALIA
Scarico e carico merci
Via Puccini, 93-95
52100 AREZZO - ITALIA
Tel. +39 0575 383151
Fax +39 0575 383152
Email: oromeccanica@oromeccanica.com
